Tööriistad ja tarvikud
Universal Aligner 63
UNIVERSAL ALIGNER 63: professional tool is essential to hold pipes still and aligned during electrofusion.
UNIVERSAL ALIGNER 160 LIGHT
UNIVERSAL ALIGNER 160: professional tool is essential to hold pipes still and aligned during electrofusion (from Ø 63 to Ø 160 mm - 2” IPS - 6” IPS).
Roller 355
This device is essential for supporting the pipes while they are being welded with the butt fusion machines.
The roller minimizes pipe friction and drag force independently of the jobsite conditions.
- ROLLER 355 can sustain pipes up to Ø 355 mm. (14” IPS).
Easy to use and light.
- ROLLER 355 can be used not only with HDPE, PP plastic pipes etc. but also with other materials such as rubber pipes, ferrous pipes etc. Mandatory requirement of smooth pipe surface.
BEVELERS
These are professional tools for bevelling the ends of plastic pipes up to Ø 315 mm (10” IPS), that will be inserted into electrical couplers or plug-in joints.
The SME 1 is made in plastic; SME 2 PLUS is made in a special Aluminum alloy.
The special shape of the blades and the non-stick coating (PTFE)
SQUEEZER 63-200
SQUEEZER 63-200 is an hydraulic squeezer, very effective and useful in the worksite, to stop the gas or water flow in the HDPE pipelines from Ø 63 to 200 mm - SDR 11, SDR 17.
SQUEEZER 63
SQUEEZER 63 is a manual tool.
SHEARS C42
SHEARS are professional tools, essential for the manual cut of plastic pipes, such as PP and PP-R up to PN 25; HDPE, PB and PVDF up to Ø 75 mm.
SHEARS C3 AC
SHEARS are professional tools, essential for the manual cut of plastic pipes, such as PP and PP-R up to PN 25; HDPE, PB and PVDF up to Ø 75 mm.
The C3 AC is entirely made in steel.
SHEARS C2 AC
SHEARS are professional tools, essential for the manual cut of plastic pipes, such as PP and PP-R up to PN 25; HDPE, PB and PVDF up to Ø 75 mm.
The C2 AC is entirely made in steel.