Band saws
TOPGEAR 630
TOPGEAR 630 is the perfect solution to jobsite plastic pipe cutting difficulties, where while safety remains one of the most important points, the cutting time is a key factor for productivity.
- CUT PRECISION
- SAFETY CONDITIONS
- OVILIZED PIPE CUTTING
- CUTTING CAPACITY PIPE WALL THICKNESS UP TO 80 mm
- USER FRIENDLY
Patent pending
With the aim of combining these two aspects Ritmo developed an innovative portable pipe saw for jobsite pipe cutting. Whatever the job-site conditions are and wherever the pipe is located,
TOPGEAR 630 can be set up for the cutting process and operated in an easy and quick way, ensuring a significative reduction of both preparation and cutting time.
Thanks to its clamps which are fastened around the pipe and on which the band-saw moves in a stable and safe way, the cut results accurate and straight even on ovalized pipes.
TOPGEAR 630 is available in 115 V at 50 or 60 Hz and in 230V at 50 Hz.
According to the chosen clamp configuration, it is possible to cut pipes with a diameter from 250 to 630 mm; IPS pipes from Ø 10” to 24” and DIPS ones from Ø 8” to 20”.
Wherever a pipe has to be cut, TOPGEAR saw is ready!
On request
Metrical - IPS – DIPS clamps
SIGMA 630 PRO
SIGMA 630 PRO is electric workshop band saw machine for plastic pipes HDPE, PP, PVDF, PVC; the ideal equipment to match Alfa fittings fabrication machines.
The SIGMA 630 PRO is designed to make angular cut, featuring a wide range of angles (from - 45° to 67,5°). Both the preparation and cutting phases are extremely simple and safe to perform.
The machine is provided with special spherical bearings guides where the machine body can easily move sideward.
The equipment includes a control panel, located at a safety distance from the cutting area, where the operator can control the automatic movement of the arch saw (IN/OUT) and also adjust and regulate the cutting speed.
Special auxiliary devices can relieve the stress on the blade and help reducing the ordinary technical maintenance.
STANDARD COMPOSITION
- Auxiliary bench for cutting tees
ON REQUEST (ACCESSORIES)
- Pipe supporting trolley
- Scraps suction device
SIGMA 400 PRO
SIGMA 400 PRO is electric workshop band saw machine for plastic pipes HDPE, PP, PVDF, PVC; the ideal equipment to match Alfa fittings fabrication machines.
The SIGMA 400 PRO is designed to make angular cut, featuring a wide range of angles (from - 30° to 67,5°). Both the preparation and cutting phases are extremely simple and safe to perform.
The machine is provided with special spherical bearings guides where the machine body can easily move sideward.
The equipment includes a control panel, located at a safety distance from the cutting area.
Special auxiliary devices can relieve the stress on the blade and help reducing the ordinary technical maintenance.
STANDARD COMPOSITION
- Auxiliary bench for cutting tees
ON REQUEST (ACCESSORIES)
- Pipe supporting trolley
Sigma 1200 - 1600 pro
SIGMA 1200 PRO and SIGMA 1600 PRO are electric workshop band saw machines, for plastic pipes up to 1290 and 1702 mm. They're the ideal equipment to match Alfa fittings fabrication machines. Both the preparation and cutting phases are extremely simple and safe to perform.
SIGMA 1200 and 1600 were specially designed to perform easy cuts with a wide range of angles (from - 45° to 67,5°). Thanks to a PLC system, the operator can input the exact cutting angles with the highest precision.
Composed of:
- Pipe housing bench, a blade-housing arm (belt type), moving on a spherical bearings guide, performing settable advancing speed. It can rotate on an arc system, and perform a wide range of share angles
- A continuous control blade guide telescopic system, to reduce to the minimum the blade vibration, regardless of the diameter and/or thickness of the pipe being cut. Provided with a laser-beam pointing system to localize the cutting area
- A safety pilot cabin, where the control panel is located. It is protected by guards for greater operator’s safety
- An easy-to-use control panel, featuring a simplified graphics display, where the inclination degree of the cutting arc is displayed
STANDARD COMPOSITION
- Band saw machine complete of an auxiliary bench to cut welded pipe sector (for Tees), and support kit for the pipe sectors (to prevent them from being damaged)
ON REQUEST (ACCESSORIES)
- Scraps suction device
RADIUS 40-315
RADIUS 40 - 315 is designed to perform saddle cuts on plastic pipes made of HDPE, PP, PVC.
The saw performs precise radial cuts, and thanks to a trolley that slide gradually on a scaled instrument, allows a fast
configuration of the cutting radius. Even the pipe support can slide and block small pieces of pipes down to 15 cm
length (6"). The saw rotation during cutting is executed manually and in complete safe conditions since the control
panel and its handles are located behind the machine away from the cutting area.
This machine is not suitable to cut different materials from those specified above, including composite pipes that may
contain other substances (polymers, metals, alloys, etc.).
STANDARD COMPOSITION
- Machine body with control panel and saw
INTEGRATIVE SYSTEMS for
OMEGA 630-315 and OMEGA 400-315